Sealing System (view video)

1194 Cliff Road
Burnsville, MN 55337

Phone
952-894-3263

Fax

952-895-9910

An indexing wheel or other methods of parts moving would transport the containers to the punch & seal areas where the punched foil induction seals will be applied.

The seals will be punched from roll stock and the scrap foil will be discarded into a scrap bin. A pneumatic punch will punch the seal from the roll stock and insert the foil seal right into the seal head. The seal head would reciprocate over the filled container, lowers onto the container, and seals the seal to the container via an induction seal operation using an Enercon Brand sealhead and power unit.

 
Go back to the products page